Skip to main content

Enroll Devices with a QR Code

Enroll Pico, Galaxy XR, HTC, and other Android devices by scanning a QR code during setup

Written by Brian Tanabe

QR Code Enrollment lets you enroll a supported device into ManageXR by scanning a QR code during enrollment without a computer or USB cable. This is an alternative to using the Device Setup Tool.

Supported devices

The following devices support QR Code Enrollment:

  • Pico 4 Enterprise, Pico 4 Ultra Enterprise, Pico G3, and Pico Swan

  • Pico Neo 3 Pro and Neo 3 Pro Eye

  • Samsung Galaxy XR and XREAL Aura

  • HTC VIVE XR Elite and VIVE Focus Vision

  • Magic Leap 2

  • RealWear Navigator 500 series

  • Vuzix M400 and M4000

  • XREAL Beam Pro

  • Android phones and tablets

QR Code Enrollment is not supported on Meta Quest, Pico Neo 2, DPVR, or Lenovo ThinkReality VRX devices. To learn how to enroll Meta Quest devices, see Meta Quest Device Enrollment.

Create your QR code

  1. In the web console, go to Devices and select Add device.

  2. Choose your device type from the sidebar: Pico, Android XR, HTC, or Other Devices.

  3. Select QR Code as the enrollment method.

    • (If using Pico) Select your device model from the dropdown.

  4. Select a Configuration for devices to enroll into. The QR code will be tied to this configuration.

    • (Optional) Toggle on "Include Wi-Fi network" and enter the network name and password to embed Wi-Fi credentials into the QR code. Due to how Android handles QR code enrollment, these credentials are embedded in plaintext in the QR code.

  5. Select Download QR code, or click the code to enlarge it for scanning straight off the screen.

Enroll a device using the QR code

  1. Factory Reset your device, or start with a new one out of the box.

  2. During setup, enter the device's QR scan mode and scan the code. Find the steps for your device in its section below. The console also shows them next to the QR code.

  3. After scanning the code, your device will download the ManageXR Admin App, enroll in your ManageXR organization, and sync the settings and content connected to your configuration.

Pico 4 Enterprise and Pico 4 Ultra Enterprise

  1. Power on your factory reset or out-of-the-box headset and complete the initial setup.

  2. Connect to Wi-Fi when prompted, unless your QR code already includes Wi-Fi information.

  3. On the "Quick Setup For Your PICO Business Headset" screen, select Quick Setup.

  4. Select Scan QR Code.

  5. Scan the QR code with your headset. Ensure the entire QR code is within the headset’s view.

  6. On the "Let's set up your work device" screen, select Accept & Continue.

  7. On the "This device isn't private" screen, select Next.

  8. Once enrollment is complete, the setup process will restart. Continue through the setup process, selecting Continue instead of Quick Setup.

In the ManageXR console, the Pico tab's Device model will be "Pico 4 / 4 Ultra Enterprise / G3 / Swan."

Pico Neo 3 Pro and Neo 3 Pro Eye

The Pico Neo 3 doesn't support scanning QR codes via its cameras. Instead, you can enroll the device by reading the QR code file from a USB-C flash drive during the setup process. Note that the QR code for a Neo 3 cannot include Wi-Fi, so you'll need to connect to Wi-Fi during the setup process.

  1. In the ManageXR console, choose the Pico tab and select the Device model "Pico Neo 3 / Neo 3 Eye." Select Download QR code and save the QR code file directly on a USB-C flash drive. Make sure the file is saved directly on the drive, not inside a folder.

  2. Plug the USB-C flash drive into the headset. Power on your factory reset or out-of-the-box headset and complete the initial setup.

  3. Connect to Wi-Fi when prompted.

  4. On the "Quick Setup For Your PICO Business Headset" screen, select Quick Setup.

  5. Open Local Storage, navigate to the USB-C flash drive, and select the QR code file.

  6. Follow the onscreen instructions to complete enrollment. Once done, remove the USB-C flash drive.

If you're already using ADB, you can skip the flash drive step. Instead, run: adb push <file name>.png /sdcard/Download/ Then, select the file from the Download folder in Local Storage.

Pico G3

The Pico G3 does not have front-facing cameras, so it can't scan a QR code. Instead, you'll need to load the QR code file onto a USB-C flash drive and read it from there, just like the Pico Neo 3.

  1. In the ManageXR console, navigate to the Pico tab, select the Device model "Pico 4 / 4 Ultra Enterprise / G3 / Swan," select Download QR code, and save the QR code file directly on the USB-C flash drive (not inside a folder).

  2. Plug the USB-C flash drive into the headset. Power on the factory reset or out-of-the-box headset and complete the initial setup process.

  3. Connect to Wi-Fi when prompted.

  4. On the "Quick Setup For Your PICO Business Headset" screen, select Quick Setup.

  5. Open Local Storage, navigate to the USB-C flash drive, and select the QR code file.

  6. Follow the on-screen instructions to complete the enrollment. Once done, remove the USB-C flash drive.

Samsung Galaxy XR and XREAL Aura

Samsung Galaxy XR and XREAL Aura both run Android XR and use the same QR code generated from the Android XR tab in the ManageXR console. Galaxy XR gained Android Enterprise support, including QR code enrollment, in the Samsung software update released April 7, 2026. If you are using an older version of Galaxy XR software, the device will ignore the button presses required to enter Enterprise Mode. To fix this, update the device via Settings > Software update, then factory reset it. For more details, see our Android XR Device Enrollment Guide.

  1. In the ManageXR console, use the Android XR tab to create your QR code.

  2. Factory reset the device, or power on a new device.

  3. On the very first setup screen, initiate Enterprise Mode:

    • Samsung Galaxy XR: Press the top button on the right side of the headset six times.

    • XREAL Aura: Press the home button six times.

  4. Confirm the Enterprise Mode notification.

  5. Continue through the setup process until you reach the QR code screen, then scan your QR code.

  6. Connect to Wi-Fi when prompted, unless your QR code includes Wi-Fi credentials.

  7. Wait for the ManageXR Admin App to download and install.

  8. Grant any permissions requested by the enrollment screen, then return to the enrollment screen.

Enterprise Mode can only be initiated from the very first setup screen. It’s easy to move past this screen without realizing it. On Galaxy XR, the first setup screen mentions accessibility. If you’ve already moved past this screen, factory reset the device and begin again.

HTC VIVE XR Elite and VIVE Focus Vision

  1. Factory reset the headset or power it on for the first time.

  2. Put on the headset and press the headset button three times in a row to turn on QR code scanning.

  3. In the console, navigate to the HTC tab and select Download QR code. Display or print the QR code so that it is at least 15 x 15 cm.

  4. Scan the QR code with the headset from 15 to 20 cm away.

  5. Follow the onscreen instructions to complete enrollment.

If you are having trouble reading the QR code, click the code in the console to enlarge it on your screen.

Magic Leap 2

  1. In the ManageXR console, navigate to the Other Devices tab to create a QR code for enrollment.

  2. Power on your factory-reset or out-of-the-box Magic Leap 2 device.

  3. Complete the setup steps until you reach the Enrollment step. This step appears after the license steps.

  4. At the Enrollment step, ensure the option to use a QR code to enroll with an MDM provider is selected and select Continue. Then, select Start Scan and scan the QR code.

Important: The Magic Leap 2 QR scanner is only available during the first-time setup process. Once the device has completed setup, the Magic Leap QR Scanner app cannot be used to enroll the device. If you need to enroll a device that has already been set up, you must factory reset it before attempting QR code enrollment.

RealWear Navigator 500 series

  1. In the ManageXR console, go to the Other Devices tab and create a new QR code. Toggle on the Include Wi-Fi network option.

  2. Power on your factory reset or out-of-the-box RealWear Navigator 500 series headset.

  3. Use the volume keys to select your preferred language.

  4. Say "OK" to navigate through the initial setup screens until you reach the QR code scanning screen.

  5. Say "SCAN QR CODE" and scan the QR code.

The RealWear requires the Wi-Fi network to be included in the QR code. Ensure that the Wi-Fi password matches the network you're connecting to. If the network is open, leave the password field blank. Networks requiring a sign-in page (captive portals) are not supported.

Vuzix M400 and M4000

  1. In your ManageXR console, navigate to the Other Devices tab to create your QR code.

  2. Power on your factory reset or out-of-the-box Vuzix glasses.

  3. When you see the “Press select to continue” setup screen, press and hold the front-most button for 3 to 4 seconds until the Vuzix provisioning app opens the camera.

  4. Scan the QR code and follow the onscreen instructions to complete enrollment.

XREAL Beam Pro

Enrollment happens on the Beam Pro, not on the XREAL glasses.

  1. In your ManageXR console, navigate to the Other Devices tab and create a QR code for enrollment.

  2. Factory reset your Beam Pro or power on a new one.

  3. On the welcome screen, tap the same spot six times to initiate QR enrollment.

  4. Continue through the setup process until you reach the QR code screen. Use the Beam Pro's camera to scan the QR code.

Android phones and tablets

  1. Create a QR code in the Other Devices tab of your ManageXR console.

  2. Factory reset your device, or turn on a new device.

  3. On the welcome screen, tap the same spot six times to initiate QR enrollment.

  4. Continue through setup until you reach the QR code screen.

  5. Scan the QR code with your device's camera.

Note: Your device must be running Android 7.0 or later.

Troubleshooting

The device will not read the QR code

Click on the QR code in the ManageXR console to enlarge it. Make sure the entire QR code is within the device’s view and there is some space around it. Hold the device steady. If it still won’t read the code, try stepping back instead of moving closer.

The device cannot connect to Wi-Fi

Check that the network name and password in the QR code match the network exactly. The Network name (SSID) must match exactly, including spaces. Leave the password blank only if the network is open. Enterprise networks (802.1X) are not supported. If the network details are incorrect, generate a new QR code or connect to Wi-Fi during setup and omit it from the QR code.

The device asks for a configuration code

If you see a screen that says “Enter your configuration code” after scanning the QR code, the device is already registered to another ManageXR organization. You can either delete it from that organization or enroll it into that organization.

The device never shows a QR scan screen

If the device does not show a QR scan screen at any point, it has already passed the step where QR enrollment begins. Factory reset the device and follow the steps above for your device type.

Limitations

  • Meta Quest devices, Pico Neo 2, Lenovo ThinkReality VRX, and DPVR devices do not support QR enrollment.

  • A QR code covers one group of related device models, so a mixed fleet needs more than one code.

  • You cannot embed enterprise Wi-Fi networks (802.1X) in the code.

  • The device needs an internet connection during setup to download the ManageXR Admin App.

  • QR enrollment only works during initial device setup. Factory reset an already-set-up device first.

Deactivating QR Codes

Anyone with your enrollment QR code can enroll devices into your organization. If you need to deactivate one of your QR codes, please contact support@managexr.com.

FAQ

Can I use one QR code for all of my devices?

Each QR code works for all headsets from the same brand. For example, one code covers all your HTC headsets.
Pico is the exception: its headsets are split into two groups, and each group needs its own code:

  • Pico 4, Pico 4 Ultra Enterprise, Pico G3, and Pico Swan

  • Pico Neo 3 and Neo 3 Eye

Do QR codes expire?

QR codes work for the chosen device indefinitely, as long as the original configuration has not been deleted. If you need to invalidate a QR code, please contact support@managexr.com.

How can I see which devices were enrolled by QR code?

Filter the Devices page by "Enrolled via QR Code."

Did this answer your question?